NR-µ - Non-linear junction detector Maximize

NR-µ - Non-linear junction detector

Call for Price!

On sale On sale!

» Add to my wishlist

NR- µ is designed to detect covert electronic devices containing semi-conducting components. 

The device allows inspection of light constructional elements of buildings, furniture etc. (in the office area) and detection of covert surveillance devices (radio microphones, microphone amplifiers, tape and digital recorders etc.) in different operational modes: in a transmission mode, switched off or in stand-by mode (for remote controlled devices).
OPERATIONAL PRINCIPLE:
Modern electronic devices usually contain semi-conducting components (diodes, transistors , computer chips etc.) These components react to a high frequency signal transmitted by non-linear junction detectors (NLJD), reradiating the energy back on doubled and tripled frequencies of the flooding signal.  This effect allows effective detection of electronics devices in office areas, inside walls, furniture etc. 

FEATURES:
  • The lightweight body and built-in cable system between the antenna and transceiver make the device compact and easy to use.
  • The advanced technology within the detector, combines the advantages of both pulse and continuous wave based NLJDs.
  • The extra antenna head LED display shows the received signal strength for both 2-nd and 3-rd harmonics.
  • Frequency adjustment polite high IMC features.
  • Telescope rod is highly effective for inspection building constructions and furniture.
 
 
Technical characteristics:
Transmitter:
Frequency 848 MHz
Power: peak pulse 2 W [+33 dBm] 
sweep mode (average continuous 0,4 W [+26 dBm]) 
signal’s curve extraction mode (20К)  average continuous 2 W [+33dBm]
Control range of output power  10 dB (step 5 dB) 
Modulation sweep mode  amplitude – pulse (duty cycle 5)
signal’s curve extraction mode (20К) CW
Receiver:
Frequencies 1696 MHz / 2544 MHz 
Sensitivity (with digital processing)  not less than -162 dB\W [-132 dBm] (at S/N ratio - 6 dB)  
Attenuator levels  (at S/N ratio - 6 dB) -10, -20, -30, -40 dB 
Antenna:
Polarization circular 
Ellipticity ratio  not less than 0,75 
Gain of transmitting antenna  not less than +6 dB 
Gain of receiving antenna  not less than +8 dB 
Main lobe angel  no more than 40° 
Back lobe level  no more than -15 dB 
Output:
Audio  tone (400 Hz) 
Display  2х16-dot LED scale (resolution 2,5 dB)
Dynamic range of the display  40 dB 
Displayed data on the control panel 
  • level of 2-nd harmonic;
  • level of 3-rd harmonic;
  • receivers’ attenuator status;
  • output power status;
  • headphone connection status (2-nd or 3-rd harmonics’ outputs);
  • 20K mode status  
Displayed data on the antenna head 
  • level of 2-nd harmonics;
  • level of 3-rd harmonics. 
Test target:
Detection range in open space (in mode with maximum transmitter output power and maximum sensitivity of receivers)  not less than 0,4 m 
The location accuracy of the test (in mode with minimum transmitter output power and minimum sensitivity of receiver)  no worse than 0,1 m 
Tactical Intercept

internationalsupport